Prompt Notebook

Press release · Marketing · Templates

How to write a press release, with a filled-in example

By T. Krause

A press release puts the news in its first sentence and gets less important as it goes on. Here is how to test whether you have news, write a lead a reporter can use, handle quotes and embargoes, and fix a first draft for an invented tool library.

To write a press release, put the news in the first sentence, then let each paragraph matter less than the one before. A standard release has a headline, a subheadline, a dateline, a lead saying who did what, when and where, then context, a quote from a named person, availability and price, a short paragraph about your organisation and a media contact. Write it in the flat tone of a news report, because the first reader is a journalist deciding whether there's a story.

The hard parts are the lead and the urge to sell, so this guide spends most of its time there. Further down, a release for an invented tool library appears in its final form, followed by the lines that changed from its first draft. If you'd rather start from a page with the headings in place, copy our free press release template.

Check that you have news

Before you write anything, answer three questions in one line each:

  1. What changed, or what will change, and on which date?
  2. Who outside your organisation will notice?
  3. Why does it matter to them now?

An opening, a launch people can buy or use, a closure, a sizeable grant or a new service with a start date will usually pass. A new logo or a "commitment to excellence" usually won't, because the second answer is empty.

If only your existing customers will notice, you probably have release notes or a newsletter item. Neither of those needs a dateline.

The parts, and what each one does

Nebraska Extension's press release guide lists ten parts: "letterhead, contacts, headline, subhead, dateline, lead, body paragraphs, quote, boilerplate and close". Boston University's quick reference for press releases adds that "press release formatting differs from company to company", so treat the table below as the usual shape. If an outlet or your own organisation has a house format, use that.

PartIts jobWhat to check
Release lineTells the journalist when they may publishEither immediate release or a stated date and time
HeadlineGives the news in a few wordsNebraska's guide says no full stop and no repeat of the wording in the subhead and lead
SubheadlineAdds the context the headline had no room forOne sentence, or none if the headline runs straight into the lead
DatelineSays where and whenCity and date, at the start of the lead
LeadDelivers the newsOne or two sentences. Nebraska's guide suggests around 25 to 30 words
ContextExpands the lead with facts and figuresShort paragraphs, each with one idea
QuoteAdds a named person's viewOpinion and reasons. Figures go in the paragraphs around it
AvailabilitySays what happens next and what it costsDates, opening times, price, where to go
BoilerplateExplains who you areTwo or three factual sentences that you can reuse
Media contactLets a reporter ask you somethingA real person who answers the phone that week

Nebraska's guide also ends a release with three hash marks (###) to show that nothing follows. Our template stops at the media contact, and you can add the marks if your outlets expect them.

Write the lead first, and test it

Boston University calls the first paragraph "the most important part of a press release" and describes the structure as an inverted pyramid: the critical information comes first, and later paragraphs narrow it down. Nebraska's guide gives the test: "Ideally, the reader should be able to stop reading after the lead and understand what the main purpose is."

So write the lead before anything else, then read it alone. If someone could not repeat the news from those sentences, it's not finished. Then write the headline from the lead, using different words.

Most weak leads fail in one of three ways. The openings and rewrites below are invented.

ProblemWeak openingRewrite
Talks about your feelings"We're delighted to announce an exciting new chapter for our family bakery.""A family bakery will open a second shop on Mill Road on 5 December, adding 12 jobs."
Starts with your history"For over 20 years, our software has helped dental practices run smoothly, and now we're building on that.""Dental practices using one booking app can now send patients a reminder by text at no extra cost."
Uses adjectives where facts should be"A leading local charity has launched an innovative programme to tackle winter loneliness.""A local charity will phone 200 people who live alone every week this winter, using 40 volunteers."

Every rewrite has a date, a number or a concrete change in it. A reporter can check and repeat each of those. "Innovative" gives them nothing to repeat.

Keep the opinion inside the quote

Boston University's first principle is "Be objective – announce the news of your product/event/company, don't sell it." The same guide says where opinion can go: "Quotes are where you can insert subjective statements because it is reporting on what someone said."

That gives you a simple rule for editing. Read each sentence outside the quote and ask whether a reporter could print it without attributing it to you. "The site has 600 tools" passes. "The site is a fantastic addition to the community" doesn't, so cut it or give the thought to the person you quote.

The reverse applies too. Nebraska's guide says quotes "are not for sharing facts or statistics". Those belong in the paragraphs around the quote, so that a reporter can lift them cleanly.

How many quotes? Guides differ here. The Ohio State public relations writing chapter says: "Include at least two quotes, one from the company or organization and another from a third party". It gives a customer, a volunteer or an event attendee as examples of that third party. Our template has room for one. Add a second whenever you can get a real one. The person you quote should read and approve their words before the release goes out, and a customer quote you drafted yourself and never showed them is a made-up quote.

Set the release time, and ask before you embargo

The Ohio State chapter explains the two options. "Immediate release" means journalists can use the information as soon as they receive it. "Under embargo until", followed by a date, means you're asking them to wait. Use an embargo when a reporter needs time to prepare and a fixed moment matters, such as an opening or a product going on sale.

The label alone doesn't bind anyone. PR Daily's article on embargoes puts it this way: "For the embargo to work, the journalist must agree to honor it." So ask first, in a short note that gives the topic and the time, and send the full release after they say yes. State the date, the time and the time zone. If the story must not leak under any circumstances, don't send it early at all.

Send it to people who cover the subject

Boston University's advice is "Tailor your writing to your audience – an editor is more apt to publish something that already fits." A release about a new tool library should go to the journalist who covers local news, in the form that suits a local news page.

A short list of named journalists will serve you better than a large list of addresses you can't vouch for. Put two lines in the email saying why this is relevant to them, and paste the release into the body of the message so nobody has to open an attachment. One follow-up is enough. A press release can't guarantee coverage.

Post the release on your own website as well. Nebraska's guide names both routes: the release goes to a reporter who writes a story, or it goes directly onto a website or social media account. Your content calendar should hold the date, so that the release, the newsletter and any social posts go out in the right order. For a product launch, add the release to the product launch checklist, beside the other launch jobs.

A filled-in example: a tool library's second site

The organisation, the people, the dates and the figures below are invented, and so is the address. The Sheffield dateline is there to show the format. The example uses the headings of our template, with the status callout at the top.

Draft. Hold for release until Tuesday 17 November 2026, 09:00 GMT. Approval needed from Tomasz and Priya.

East Sheffield gets its own tool library on 28 November

Residents there can borrow ladders, drills and mowers without carrying them across the city on a bus.

Sheffield, 17 November 2026. Marrowgate Tool Library will open a second lending site on Foundry Street in east Sheffield on Saturday 28 November, giving members nearby 600 tools at £1 a week each.

The library's first site, in the city centre, made 4,200 loans in the year to October 2026. Members living in the east of the city took 1,400 of them, a third of the total. Nine of the library's volunteers will staff the new site.

"People kept telling us the hard part of borrowing a ladder was getting it home," said Priya Nair, the library's coordinator. "We wanted those members to be able to walk."

Foundry Street will open on Wednesdays from 17:00 to 20:00 and on Saturdays from 10:00 to 16:00. Membership costs £20 a year, and borrowing a tool costs £1 a week on top. Existing members can use either site with the same card.

About Marrowgate Tool Library

Marrowgate Tool Library is a volunteer-run lending library for household and garden tools. It was founded in Sheffield in 2019 and has 850 members and 23 volunteers.

Media contact

  • Tomasz Wrona, press@example.org, 0114 496 0123
  • Photos of the new site: press kit link

What changed from the first draft

The first draft was also invented, and each of its problems is common.

First draftFinal versionReason
"Marrowgate is proud to announce an exciting expansion""Marrowgate Tool Library will open a second lending site on Foundry Street…"The draft's opening contained no news. The final lead has the who, what, where and when in 29 words
Headline: "Marrowgate Tool Library opens second lending site""East Sheffield gets its own tool library on 28 November"The old headline repeated the lead's wording and left out the date
Quote: "We made 4,200 loans last year, and 1,400 went to the east of the city"Figures moved to the paragraph above the quoteA coordinator reciting statistics sounds odd, and reporters can reuse the figures more easily outside the quote
"affordable, sustainable access to quality tools""£1 a week" and "£20 a year"A price can be checked. "Affordable" is the writer's opinion, and it sat outside the quote
"The perfect way to tackle those winter DIY jobs"CutThis is an advertising line, and a reporter couldn't print it as fact

One thing is still open. This draft has one quote, and the Ohio State chapter would want a second from a third party. Tomasz has a member in mind, and her words go in only if she agrees. If she doesn't reply in time, the release goes out with Priya's quote alone. That's why the callout still says draft.

Writing a press release in Prompt Notebook

Prompt Notebook is ours, so read this part with that in mind. The press release template is a single page in a serif font. It has a red callout for the embargo and approvers, then the headline, subheadline, dateline and quote, followed by About and Media contact headings. The sample announces an invented invoicing feature, so you can see a complete release before you replace it.

For approvals, open Share and set the link to "Signed-in visitors can comment; others get view access". Approvers sign in to comment. Their comments appear in a panel beside the page. Afterwards, page history shows what you changed since they read it.

To tighten a lead, select it and choose Ask AI. "Make shorter" often helps. "Improve writing" only clarifies text, so if you want a change of register, type an instruction in the selection box, such as "rewrite as one news sentence with who, what, when and where, and no adjectives". Check every name, date and figure in the result against your facts before you insert it.

Leave "Publish to the web" switched off until the embargo lifts, because publishing creates a read-only copy anyone with the link can open without an account. Once the news is out, that link is an easy thing to send a journalist. Search engines are asked not to index published pages, so if you want people to find the release through search, put it on your own website too. To paste the release into an email or a website, use Export as Markdown or Export as HTML.

Frequently asked questions

How long should a press release be?

One page is the safer target, and neither guide asks for more than two. The Ohio State chapter says "as concise as possible and ideally no longer than one page", and Nebraska's guide says a release "should be one to two pages". Nebraska also asks for a lead of around 25 to 30 words and body paragraphs of three or four sentences at most. If yours runs longer, the later paragraphs probably belong on a linked page.

What is a dateline in a press release?

The city and date at the start of the first paragraph, showing where the news comes from and when you issued it. A typical one reads "Sheffield, 17 November 2026." Some style guides set it in capitals or follow it with a dash, so follow your outlet's format if it has one.

What does "for immediate release" mean?

It tells journalists they can publish the information as soon as they receive it. If you'd rather they waited, replace it with a stated date and time, and agree that embargo with each journalist before you send the release.

Who should be quoted in a press release?

Someone with a real connection to the news, named with their job title. That's usually the person leading the project, plus a customer, partner or volunteer if one will speak on the record. Have each of them approve their words before you send anything.

Can a small business send a press release?

Yes, when it has news for people outside the business. Local openings, new services and events suit local outlets well. Write to the journalist who covers that area or subject, and expect to follow up once. Some releases will get no coverage, so post yours on your own site too.

Try it on your own notes

Prompt Notebook is free, with unlimited pages. Type one sentence and the AI drafts the first version.

Cookies and storage

Prompt Notebook needs one cookie to keep you signed in. Accepting turns on Google Analytics and Google's reCAPTCHA spam check on the contact form, and declining keeps the form working. Nothing optional runs until you choose.

Read the privacy notice