Prompt Notebook

Lesson plan · Teaching · Templates

How to write a lesson plan, with a filled-in example

By T. Krause

A lesson plan is easiest to write backwards, from what students should be able to do to how you'll check it, and only then the activities. Here is how to write goals you can check, budget the minutes, plan for cover teachers, and a filled-in science lesson.

To write a lesson plan, start with what students should be able to do by the end, then decide how you'll check that, and only then choose the activities. Add the materials, a sequence with minutes against each part, what you'll change for students who need more support or more challenge, and a short check at the end. Leave a space to note what you'd change next time.

If your school, course or training provider has its own lesson plan format, use that format and treat this guide as a way of filling it in. The worked example further down is an invented 60-minute science lesson. If you'd rather start from a page with the headings in place, copy our free lesson plan template.

Plan backwards from the end of the lesson

It's tempting to start with an activity you like, then work out what it teaches. The alternative is backward design. The University of Iowa's Center for Teaching describes it as "a framework for planning a lesson, a module, or an entire course", and credits the term to Jay McTighe and Grant Wiggins in Understanding by Design. The order is learning objectives first, then the assessment, then the activities and materials.

The Iowa page is written for university teachers and Johns Hopkins' short guide is about whole courses, but the order works at the scale of one lesson. Johns Hopkins describes the traditional content-first approach as one that "focuses on what the teacher wants to do". Writing the goal first puts the question the other way round: what will the students be able to do?

For one lesson, that gives you this working order:

  1. Write two or three goals.
  2. Write the end-of-lesson check, with one question or task per goal.
  3. Choose activities that prepare students for that check.
  4. Add up the minutes, then cut what doesn't fit.
  5. Write the support and stretch tasks, the materials and any safety notes.

Write goals you could check by looking

Iowa advises writing objectives that are "specific and measurable", and suggests Bloom's taxonomy as a tool for choosing what kind of learning you're after. The quick version is to finish the sentence "By the end of the lesson, students can…" with a verb you could watch someone do.

Too vague to checkCheckable
Understand fractionsMark three-quarters on a number line and explain how they found it
Know about the causes of the First World WarName two long-term causes and give one example of each
Appreciate the poemPick one line and explain how its imagery supports the poem's mood
Learn about the past tenseWrite five sentences about last weekend using the past tense correctly

These example goals are ours. If a goal starts with "understand", "know" or "appreciate", ask what a student who understands would be able to say or do that one who doesn't couldn't. Then write that down.

Keep it to what one lesson can hold, which is usually two or three goals. Six goals in 50 minutes usually means several of them get only a mention.

Write the end-of-lesson check next

Penn State's Pathways to Pedagogy describes the exit ticket, or ticket out the door, as a short assessment that students complete "in the final minutes of class" and hand in as they leave. The goal, it says, "is to gauge where students are at the end of a lesson". It can be graded or ungraded. Afterwards, the teacher reads the responses "to determine what topics may need further review in the next lesson".

Writing the questions now does two jobs. It makes each goal concrete, and it shows you what the activities have to prepare students for. A good test is to compare them line by line. If a question has no matching goal, cut the question or add the goal. If a goal has no question, you won't find out whether anyone reached it.

A sorted pile of slips is often enough to plan from. After class, split them into got it, partly and not yet, then look at the "not yet" pile for a shared misunderstanding. That pile tells you how to start tomorrow. Treat the result as one snapshot, since a student can answer correctly today and forget by next week.

Budget the minutes

Put a number next to every part, and check that the total matches the lesson. A common sequence looks like this, though the shape and the minutes will depend on your subject and the lesson's length. It's a starting point we use in our template.

PartWhat it's forIn a 50-minute lesson
StarterGets everyone thinking, and links to earlier learning5
ExplainNew material in small steps, with questions as you go10
ActivityStudents do the thing the goal describes20
DiscussStudents explain what they found, and you correct misunderstandings10
Exit ticketThe check you wrote earlier5

Two points from Barak Rosenshine's article Principles of Instruction, published in American Educator, are useful when filling this in. He lists "Begin a lesson with a short review of previous learning" as one of his ten principles, which is a reason to use the starter for more than a warm-up. Another is "Ask a large number of questions and check the responses of all students". He contrasts this with teachers who "simply asked, 'Are there any questions?'" and assumed that silence meant understanding.

So plan your questions in advance, and plan how you'll see every student's answer, such as mini whiteboards or a show of hands. That usually takes longer than you expect, so build the time in.

Two more habits help on the day. They're our suggestions, so adapt them to your class:

  • Mark what to cut if you run late. Decide now which part shrinks if the activity overruns. Protect the exit ticket, because it's the first thing to disappear when time runs out.
  • Add transition time for practical work. Moving groups, handing out equipment and clearing up all take minutes. Give them a line in the sequence.

Plan support and stretch against the same goal

Support changes how a student gets to the goal, and stretch takes the same idea further. Neither should turn into a separate lesson. Write one or two lines of each, and make them things you can prepare in advance, such as a word bank, a part-finished diagram or a harder question.

If you have students with formal support plans, those plans and your school's guidance come first. Keep anything about a named student out of a plan that other people might see.

Write it so someone else could teach it

A good test of a lesson plan is whether a colleague could pick it up at 8:30 and teach it at 9:00. That means slide numbers, how groups are formed, where the equipment is and the answers to any questions you're asking. You may never need a cover teacher, but you will come back to the plan next year, and by then you'll have forgotten what you meant.

Keep the plan as long as it needs to be for that test, and no longer. An experienced teacher repeating a familiar lesson might need half a page. Someone teaching a topic for the first time, or being observed, will usually write more.

A filled-in example: filtering sand and salt

The lesson, class and timings below are invented, and it's here to show the format. It hasn't been taught, and it's no substitute for your own curriculum or your school's practical safety procedures. It uses our template's headings.

60 minutes. Class 7c, 24 students. Room S4 (lab). Tuesday 17 November 2026, period 2.

Learning goals

By the end of the lesson students can:

  • Label the residue and the filtrate on a filtering diagram
  • Describe how filtering separates sand from water
  • Explain why filtering doesn't remove salt that has dissolved in water

Materials

  • Funnels, filter paper, two beakers, spoon, sand, salt and water (6 sets, one per group), in trays on the side bench
  • Worksheet "Sand and salt" (24 copies), on desks before the lesson
  • Exit slips with the diagram (24 copies), on the front desk
  • Support diagrams and picture cards, on the front desk
  • Slides 1 to 6
  • Evaporating dish on the front desk, left to dry since yesterday, holding salt crystals from salty water
  • Mini whiteboards, one per student, in the box by the door

Sequence

  1. Starter (5 min, slide 1): review from last lesson. On whiteboards, "What does dissolved mean?" Looking for: the solid has spread through the liquid and can't be seen, but it's still there. Then, without discussion, each student writes a guess at the top of the worksheet: "You pour salty, sandy water through filter paper. Where does the salt end up?"
  2. Explain (10 min): filter paper as a sieve with tiny holes, the words residue and filtrate, slides 2 to 5. Whiteboards up after each slide
  3. Practical (25 min): groups of 4 from the seating plan, one group per bench. One student from each group collects a tray. Groups stir sand and salt into water, then filter it and record what they see on the worksheet. Includes handing out equipment
  4. Clear up (3 min): trays back on the side bench
  5. Discuss (12 min, slide 6): where did the salt go? Looking for: it dissolved, passed through the paper with the water and is still in the filtrate. Pass round the dried dish. Each student then rewrites their starter guess as an explanation, using the word dissolved. If the practical overruns, this part shrinks to 7 minutes
  6. Exit ticket (5 min): three questions on a slip

Differentiation

  • Support: diagram with the labels in a word bank, method printed as numbered picture cards
  • Stretch: plan how to get dry salt back from the filtrate, and say which step needs the longest wait. Answer: leave the water to evaporate, which is the longest wait

Safety

  • Follow the school's risk assessment for this practical
  • Nothing in the lab gets tasted, including the salt water
  • Wipe spills straight away, since wet floors are a slip risk

Exit ticket

  1. Label the residue and the filtrate on this diagram
  2. In one sentence, how does filter paper separate sand from water?
  3. Maria says the water in her beaker is pure because she filtered it. Why is she wrong?

Answers for sorting the slips:

  1. The residue is the sand left on the paper, and the filtrate is the liquid in the beaker
  2. The water and the dissolved salt pass through the tiny holes, and the sand grains are too big to get through
  3. The salt dissolved, so it passed through the paper with the water and her filtrate is still salty

After the lesson

How did it go? (Left empty until the lesson has been taught.)

Goal by goal

Each goal should show up three times: where students meet it, where they practise it and where you check it.

GoalWhere students meet itWhere they practise itWhere you check it
Label residue and filtrateExplainWorksheet in the practicalExit question 1
Describe how filtering separates sandExplainThe practicalExit question 2
Explain why dissolved salt stays in the waterDiscuss, with the dried dishRewriting the starter guess as an explanationExit question 3

If any of those cells were empty, the plan would have a gap. The third goal comes last on purpose, because students need to have seen the clear liquid before the dried dish means anything.

After the lesson is empty here because the lesson is invented. A note that would help next year is something like "the practical needed 30 minutes, not 25, so give out the equipment before the explanation".

Keep plans you can reuse

A lesson plan gets more useful the second time you teach it, provided you filled in that last section. Write the note the same day. Then save your plans somewhere you can find by topic, grouped by unit, so next year's version starts from this year's plan and not a blank page.

If students take notes in your lessons, our guide to the Cornell notes method is a structure you could teach them, and it comes with a filled-in biology example. To keep a term's work in one place, the course hub template is laid out by course, with one sub-page per lecture, and you can rename its parts for a teaching unit.

Writing lesson plans in Prompt Notebook

Prompt Notebook is ours, so weigh this part with that in mind. The lesson plan template is one page per lesson, with a green callout for the length, class, room and date. Under it are Learning goals, Materials, Sequence, Differentiation, Safety, Exit ticket, and an After the lesson toggle. The sample is an invented Year 8 photosynthesis lesson.

For a unit, type /page on a unit page to create each lesson as a sub-page. Once you've adjusted the headings to suit your subject, choose Save as template from the page menu, so each new lesson starts in your format.

To give a plan to a cover teacher, open Share and set the link to "Anyone with the link can view". They don't need an account to read it. Remember that everyone with the link can read the page, so leave student names out of it.

Ask AI can draft a first version. On a blank page, describe the lesson with the year group, length and goals. It can also adapt a section: select the sequence and type "cut this to 45 minutes and tell me what you removed". Check every fact, timing and safety step yourself, because the AI doesn't know your class, your room or your school's rules.

Frequently asked questions

What are the main parts of a lesson plan?

Learning goals, materials, a timed sequence of activities, support and stretch tasks, and a check at the end to see whether students reached the goals. Add safety notes for practical work, and a space for your notes afterwards. Your school may require other sections, such as curriculum references.

How detailed should a lesson plan be?

Detailed enough that a colleague could teach from it without asking you anything. That might be half a page for a familiar lesson and two pages for a new one. If your training provider or school sets a format, follow that.

What is the difference between a lesson plan and a unit plan?

A lesson plan covers one session, with minutes against each part. A unit plan covers a series of lessons on a topic, setting out what comes in what order and how you'll assess it at the end. Write the unit plan first, so each lesson knows what it has to contribute.

What is an exit ticket?

A few short questions that students answer in the last minutes of a lesson and hand in as they leave. You read the answers afterwards to decide what to revisit next time. It can be graded or ungraded.

Do you need to write a lesson plan for every lesson?

That depends on your school and your experience. Many schools set their own expectations, and trainee teachers are often asked for full plans. Even without a requirement, goals, an end check and rough timings give you something to teach from.

Try it on your own notes

Prompt Notebook is free, with unlimited pages. Type one sentence and the AI drafts the first version.

Cookies and storage

Prompt Notebook needs one cookie to keep you signed in. Accepting turns on Google Analytics and Google's reCAPTCHA spam check on the contact form, and declining keeps the form working. Nothing optional runs until you choose.

Read the privacy notice